Sunday, July 17, 2011

Electrical and Mechanical Safety Problems in Home Improvement

Sunday, July 17th, 2011 at 1:30 pm ?

People getting hurt on the job is one of the biggest causes of downtime in any industry. This is even more true for industries where there is a lot of maintenance and physical labor involved. There has been a lot of research into safety issues and a lot of money has been invested in it. The main reason is that it is financially sound for any company to reduce the likelihood of accidents occurring as much as they can. These safety issues also apply to home improvement endeavors. You are at least half of the source of income for your home, and you do not want to jeopardize yourself in any way. You also want to avoid the pain.
Sometimes power equipment comes with many safety features. One such feature is the protection panel found generally on power tools used for cutting and grinding. You should never take off the guard just to make something more convenient to use. You can end up injuring your face, eyes or hands with flying debris. You should also always wear a pair of good safety glasses when working with these tools. You should also always wear leather gloves, along with protection glasses, to keep your hands from getting hurt. This isn?t hard to remember and is basic common sense. Unfortunately, there seems to be a percentage of people who will ignore them and get hurt.
Regardless of your situation at home, you can use high-quality ladders to do the job. But there are some important points that you should be aware of as it concerns ladders. If you are working on electrical circuits, then avoid using a conductive ladder such as aluminum. It is possible to be electrocuted while standing on a metal ladder that is firmly planted in the ground. So you will want to use wooden or composite ladder that is non-conductive. Depending on how heavy you are, you need to get a ladder that can sustain your weight. More than likely you can find this information on a sticker or a label.
Accidents involving electricity can sometimes be understood because many of them are caused by people who don?t understand what they are doing. It doesn?t really help after the problem has occurred, but it is mainly good judgment. Thus, whenever you are doing something to an appliance, simply unplug it. If you are going to be working on the unit, make sure that you take the power cord out of the wall socket. If you need to change something, such as a drill bit or saw blade, always unplug the unit. Many accidents still happen despite the fact that these are obvious safety precautions. So always just slow down a little bit and think before proceeding with powered tools.
It is impossible to cover all the possibilities with the various hazards around the home. All any person can really do is work carefully and avoid rushing or taking short cuts. If you avoid taking shortcuts, you?ll avoid most safety hazards.

If you would like to find out more about keeping your home and basement mold free visit Dehumidifiers for home.

Filed under: DIY

Like this post? Subscribe to my RSS feed and get loads more!

Source: http://www.articles-fresh.com/electrical-and-mechanical-safety-problems-in-home-improvement/

kipling james bond mss mss the kills oracle born this way

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.